DIAbide Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals

MAC 7 Catalog

For pricing contact sp³ at 888-547-4156

This page lists MAC 7 endmills. For a catalog of all standard endmills click here. For a full guide to Material Application Codes refer to the MAC Overview.

Standard MAC 7 endmills are available in fractional inch diameters from 1/8" to 1/2". MAC 7 metric endmills are not currently offered as catalog products. If you wish to purchase MAC 7 metric endmills, please call 800-773-9940 or 650-966-0630.
Append MAC number to part number when ordering.

Available from stock

For other types of endmills select from the following:
Fractional inch size endmills with corner radius.
Profiling endmills.
Premium moldmills.

STANDARD FRACTIONAL INCH SIZE ENDMILLS
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Part No.		MAC
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	images/square	Ball Nose	7

1/8	1/8	1/2	1-1/2	2	12001	–
				2	–	12020
				4	12002	–
				4	–	12021
		1	3	4	12040	–
			3	4	–	12049
			4	4	—	12360

3/16	3/16	5/8	2	2	12004	–
				2	–	12023
				4	12005	–
				4	–	12024
		1	4	4	12041	–
		1	4	4	–	12050

1/4	1/4	3/4	2-1/2	2	12007	–
				2	–	12026
				4	12008	–
				4	–	12027
		1-1/4	4	4	12042	–
			4	4	–	12051
			6	4	12043	–
			6	4	–	12052

5/16	5/16	13/16	2-1/2	2	12010	–
				2	–	12029
				4	12011	–
				4	–	12030
		1.312	3	4	12369	—
		1-1/2	4	4	12044	–
			4	4	–	12053
			4	6	12370	–
			4	6	–	12371

3/8	3/8	1	2-1/2	2	12013	–
				2	–	12032
				4	12014	–
				4	–	12033
		1-1/2	4	4	12045	–
				4	–	12054
				4	12046	–
				4	–	12055
		1.312	3	4	12374	–

1/2	1/2	1	3	2	12016	–
				2	–	12035
				4	12017	–
				4	–	12036
		2	4	4	12047	–
		2	4	4	–	12056
		3	6	4	12019	–
		3	6	4	–	12038

3/4	3/4	1-1/2	4	4	12198	—
3/4	3/4	1-1/2	4	4	—	12200

1	1	1-1/2	4	4	12199	—
1	1	1-1/2	4	4	—	12201
All dimensions are in inches. *Maximum diamond-coated flute length is 2-1/2".

Tolerances – Standard Fractional Inch Endmills
All dimensions in in.	Cutting Diameter	Shank Diameter	Runout	Length of Cut	Overall Length
MAC 7	+0.002/-0.000	-0.0001/-0.0004	<0.002	+.060/-.000	±.060

sp³ will supply a free sample for a new application

To order call 888-547-4156

OverviewMachining GuidelinesApplications

DIAbide Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals

MAC 7 Catalog

For pricing contact sp3 at 888-547-4156

STANDARD FRACTIONAL INCH SIZE ENDMILLS

1/8

3/16

1/4

5/16

3/8

1/2

3/4

1

sp3 will supply a free sample for a new application

To order call 888-547-4156

For pricing contact sp³ at 888-547-4156

sp³ will supply a free sample for a new application