|
DIAbide Premium Moldmillsfor Machining Non-Metallic Materials and Non-ferrous Metals |
Catalog |
|
DIAbide Premium Moldmillsfor Machining Non-Metallic Materials and Non-ferrous Metals |
Catalog |
| Moldmills available from stock are listed in three tables:
– Standard reach, fractional inch sizes in diameters from 1/64" to 1/2" – Long reach, fractional inch sizes in diameters from 1/64" to 1/4" – Long reach, metric sizes in diameters from 1 mm to 3 mm. images/square end, ball end, and radiused images/square end styles are listed in the tables. images/square end moldmills with a non-standard corner radius are available on special order; consult sp3. To select the optimum tool for your application refer to Material/Tool Selection or to the full guide to Material Application Codes. Append MAC number to part number when ordering.  Delivered from stock. |
PREMIUM MOLDMILLS – STANDARD REACHFractional inch sizes |
||||||||||
| Cutting Diameter |
Shank Diameter |
Length of Cut |
Overall Length |
Corner Radius |
Number of Flutes |
Part No. | MAC 3 | MAC 5 | ||
| images/square | Corner Radius |
Ball Nose |
||||||||
 |
||||||||||
1/64 |
1/8 | 3/64 | — | 2 | 12157 | – | – | |
|
|
| 3/64 | — | 2 | – | — | 12179 | |
|
|||
|
||||||||||
1/32 |
1/8 | 3/32 | — | 4 | 12158 | – | – | |
|
|
| 1/4 | 3 | — | 4 | 12159 | – | – | |
|
||
| 3/32 | — | 4 | – | — | 12180 | |
|
|||
| 1/4 | 3 | — | 4 | – | — | 12181 | |
|
||
|
||||||||||
1/16 |
1/8 | 1/4 | — | 4 | 12160 | – | – | |
|
|
| 1/2 | 3 | — | 4 | 12161 | – | – | |
|
||
| 1/4 | .015 | 4 | – | 12174 | – | |
|
|||
| 1/4 | — | 4 | – | — | 12182 | |
|
|||
| 1/2 | 3 | — | 4 | – | – | 12183 | |
|
||
|
||||||||||
3/32 |
1/8 | 3/8 | — | 4 | 12162 | – | – | |
|
|
| 1/2 | 3 | — | 4 | 12163 | – | – | |
|
||
| 3/8 | — | 4 | – | – | 12184 | |
|
|||
| 1/2 | 3 | — | 4 | – | – | 12185 | |
|
||
|
||||||||||
1/8 |
1/8 | 1/2 | — | 4 | 12164 | – | – | |
|
|
| 1 | 3 | — | 4 | 12165 | – | – | |
|
||
| 1 | 3 | .015 | 4 | — | 12175 | – | |
|
||
| 1 | 3 | .030 | 4 | – | 12176 | – | |
|
||
| 1/2 | — | 4 | – | – | 12186 | |
|
|||
| 1 | 3 | — | 4 | – | – | 12187 | |
|
||
|
||||||||||
3/16 |
3/16 | 5/8 | 2 | — | 4 | 12166 | – | – | |
|
| 1 | 4 | — | 4 | 12167 | – | – | |
|
||
| 5/8 | 2 | — | 4 | – | — | 12188 | |
|
||
| 1 | 4 | — | 4 | – | — | 12189 | |
|
||
|
||||||||||
1/4 |
1/4 | 3/4 | — | 4 | 12168 | – | – | |
|
|
| 4 | — | 4 | 12169 | – | – | |
|
|||
| 4 | .015 | 4 | – | 12177 | – | |
|
|||
| 4 | .030 | 4 | – | 12178 | – | |
|
|||
| 3/4 | — | 4 | – | – | 12190 | |
|
|||
| 4 | — | 4 | – | – | 12191 | |
|
|||
|
||||||||||
3/8 |
3/8 | 1 | — | 4 | 12170 | – | – | |
|
|
| 4 | — | 4 | 12171 | – | – | |
|
|||
| 1 | — | 4 | – | — | 12192 | |
|
|||
| 4 | — | 4 | – | — | 12193 | |
|
|||
|
||||||||||
1/2 |
1/2 | 1 | 3 | — | 4 | 12172 | – | – | |
|
| 2 | 4 | — | 4 | 12173 | – | – | |
|
||
| 1 | 3 | — | 4 | – | — | 12194 | |
|
||
| 2 | 4 | — | 4 | – | — | 12195– | |
|
||
| All dimensions are in inches. |
||||||||||
| Back to top |
PREMIUM MOLDMILLS – LONG REACHFractional inch sizes |
|||||||||||
| Cutting Diameter |
Shank Diameter |
Length of Cut |
Overall Length |
Reach | Corner Radius |
Number of Flutes |
Part No. |
MAC 3 | MAC 5 | ||
| images/square | Corner Radius |
Ball Nose |
|||||||||
|
|||||||||||
1/64 |
1/8 | 3/64 | 0.16 | — | 2 | 12156 | — | – | |
|
|
| 3/64 | 0.16 | — | 2 | — | – | 12138 | |
|
|||
|
|||||||||||
1/32 |
1/8 | 3/32 | 3 | 0.31 | — | 4 | 12127 | – | – | |
|
| 3/32 | 3 | 0.31 | — | 4 | – | — | 12139 | |
|
||
|
|||||||||||
3/64 |
1/8 | 3/16 | 3 | 0.47 | — | 4 | 12128 | – | – | |
|
| 3/16 | 3 | 0.47 | — | 4 | – | — | 12140 | |
|
||
|
|||||||||||
1/16 |
1/8 | 1/4 | 3 | 0.63 | — | 4 | 12129 | – | – | |
|
| 1/4 | 3 | 0.63 | .010 | 4 | – | 12150 | – | |
|
||
| 1/4 | 3 | 0.63 | — | 4 | – | – | 12141 | |
|
||
|
|||||||||||
3/32 |
1/8 | 3/8 | 3 | 1.00 | — | 4 | 12130 | – | – | |
|
| 3/8 | 3 | 1.00 | .015 | 4 | – | 12151 | – | |
|
||
| 3/8 | 3 | 1.00 | — | 4 | – | – | 12142 | |
|
||
|
|||||||||||
1/8 |
1/8 | 1/2 | 3 | 1.50 | — | 4 | 12131 | – | – | |
|
| 1 | 3 | 1.50 | — | 4 | 12132 | – | – | |
|
||
| 1 | 3 | 1.50 | .015 | 4 | – | 12152 | – | |
|
||
| 1 | 3 | 1.50 | .030 | 4 | – | 12153 | — | |
|
||
| 1 | 3 | 1.50 | — | 4 | – | – | 12144 | |
|
||
|
|||||||||||
3/16 |
3/16 | 1 | 4 | 1.88 | — | 4 | 12133 | – | – | |
|
| 1 | 4 | 1.88 | — | 4 | – | — | 12145 | |
|
||
|
|||||||||||
1/4 |
1/4 | 4 | 2.00 | — | 4 | 12134 | – | – | |
|
|
| 4 | 2.00 | .015 | 4 | – | 12154 | – | |
|
|||
| 4 | 2.00 | .030 | 4 | – | 12155 | — | |
|
|||
| 4 | 2.00 | — | 4 | – | – | 12146 | |
|
|||
| All dimensions are in inches. |
|||||||||||
| Back to top |
| Tolerances – Premium Moldmills, Fractional Inch Sizes | ||||||
| MAC 3 and 5 | Cutting Diameter |
Shank Diameter |
Runout | Length of Cut |
Overall Length |
|
| up to 3/32 | +0.0000/-0.0005 | -0.0001/-0.0003 | 0.001 | +.060/-.000 | ±.060 | |
| above 3/32 | +0.000/-0.001 | |||||
|
All dimensions
are in inches. |
||||||
| Back to top |
PREMIUM MOLDMILLS – LONG REACHMetric sizes |
|||||||||
| Cutting Diameter |
Shank Diameter |
Length of Cut |
Overall
Length |
Reach | Number of Flutes |
Part No. |
MAC 3 | MAC 5 | |
| images/square | Ball Nose |
||||||||
|
|||||||||
1 |
3 | 4 | 75 | 10 | 4 | 12135 | – | |
|
| 4 | 75 | 10 | 4 | – | 12147 | |
|
||
|
|||||||||
2 |
3 | 10 | 75 | 20 | 4 | 12136 | – | |
|
| 10 | 75 | 20 | 4 | – | 12148 | |
|
||
|
|||||||||
3 |
3 | 15 | 75 | 30 | 4 | 12137 | – | |
|
| 15 | 75 | 30 | 4 | – | 12149 | |
|
||
| All dimensions are in
mm. |
|||||||||
| Back to top |
| Tolerances – Premium Moldmills, Metric Sizes | |||||
| MAC 5 | Cutting Diameter |
Shank Diameter |
Runout | Length of Cut |
Overall Length |
| +0.000/-0.012 | -0.0025/-0.01 | 0.025 | +1.50/-.00 | ±1.5 | |
| All dimensions are in mm. |
|||||
| Back to top |
 |
To order call 888-547-4156 |
